Cisco Small Business RV042 4-Port Dual WAN VPN Router

160,00 JOD

2 x 10/100Mbps WAN Ports 4 x 10/100Mbps LAN Ports 4-Port 10/100 Switch

Product Specifications 

  • Mfr Part Number: RV042
  • Features:
    • Dual 10/100 Mbps Fast Ethernet WAN ports for load balancing and/or business continuity
    • Built-in 4-port Fast Ethernet switch
    • Strong security – Proven stateful packet inspection (SPI) firewall, and hardware encryption
    • High capacity, high-performance IP Security (IPsec) VPN capabilities
    • Intuitive, browser-based device manager and setup wizards
  • Standards:
    • 802.3, 802.3u
    • IPv4 (RFC 791)
    • Routing Information Protocol (RIP) v1 (RFC 1058) and v2 (RFC 1723)
  • Ports: 4x 10/100 RJ-45 Ports, 1x 10/100 RJ-45 Internet Port, 1x 10/100 RJ-45 DMZ/Internet Port
  • Dual WAN: Configurable for Smartlink backup or load balancing
  • Network Protocols:
    • Dynamic Host Configuration Protocol (DHCP) server, DHCP client, DHCP relay agent
    • Static IP
    • Point-to-Point Protocol over Ethernet (PPPoE)
    • Point-to-Point Tunneling Protocol (PPTP)
    • Transparent bridge
    • DNS relay, Dynamic DNS (DynDNS, 3322)
  • Routing Protocols: Static; RIP v1 and v2
  • Network Address Translation (NAT):
    • Port Address Translation (PAT)
    • Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT
  • Protocol Binding: Protocols can be bound to a specific WAN port for load balancing
  • Network Edge (DMZ): DMZ port, DMZ host
  • Security:
    • Firewall: SPI, denial of service (DoS), ping of death, SYN flood, land attack, IP spoofing, email alert for hacker attack
    • Access Rules: Up to 50 entries
    • Port Forwarding: Up to 30 entries
    • Port Triggering: Up to 30 entries
    • Blocking: Java, cookies, ActiveX, HTTP proxy
    • Content Filtering: Static URL blocking or keyword blocking
    • Secure Management: HTTPS, username/password, password complexity
  • VPN:
    • IPsec: 50 IPsec site-to-site tunnels for branch office connectivity
    • QuickVPN: 50 QuickVPN tunnels for remote client access
    • PPTP: 5 PPTP tunnels for remote access
    • Encryption: Data Encryption Standard (DES), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption; AES-128, AES-192, AES-256
    • Authentication: MD5/SHA1 authentication
    • IPsec NAT Traversal: Supported for gateway-to-gateway and client-to-gateway tunnels
    • VPN Pass-through: PPTP, L2TP, IPsec
    • Advanced VPN: Dead peer detection (DPD), IKE, split DNS
  • Quality of Service (QoS):
    • Prioritization Types: Application-based priority on WAN port
    • Service-based QoS: Supports rate control or priority
    • Rate Control: Upstream/downstream bandwidth can be configured per service
    • Priority: Each service can be mapped to one of 3 priority levels
  • Performance:
    • NAT Throughput: 100 Mbps
    • IPsec VPN Throughput: 59 Mbps
  • Configuration: Web user interface – Simple browser-based device manager (HTTP/HTTPS)
  • Management:
    • Management Protocols: Web browser, Simple Network Management Protocol (SNMP) v1 and v2c, Bonjour
    • Event Logging: Syslog, email alerts, VPN tunnel status monitor
    • Upgradability: Firmware upgradable through web browser, imported/exported configuration file
  • Power Supply: 12V 1A
  • Certification: FCC class B, CE Class B, cUL, Anatel, MEPS, CCC, PSB, CB, C-tick, KCC
  • Dimensions (WxDxH): 5.12 x 7.87 x 1.52 inch / 130.0 x 200.0 x 38.5 mm
  • Weight: 1.27 lbs / 0.576 kg
Other
Availability:

Out of Stock

Product Code:

RV042

Brand:

CISCO